User Manual

H.265 VANGUARD II Series

Bitrate Mode: Select User-defined to set up bitrate manually; or Predefined to auto-select

bitrate.

Bitrate: The Bitrate corresponds to the speed of data transfer that the DVR will use to record

video. Recordings that are encoded at higher bitrates, will be of better quality.

Audio: Select this option if you want to record audio along with video. Please ensure the

camera supports audio function and a microphone has been connected to the DVR. You can

further configure audio settings of IP cameras. Please refer to 4.2.1.4 Audio.

i-Frame Interval: This function is only available for certain IP cameras. Please consult

EverFocus. Input an i-Frame interval.

I/O: Select this option if you want to enable external IO alarm for Main Stream recording.

Copy: You can apply the same configurations from one channel to other channels. Select a

channel from the Source Channel drop-down list and then select the parameters you would

like to apply to other channels. Select the desired channels from the Target Channel field

and then click the Copy button.

Default: Click to apply the default setting.

Apply: Click to save the settings.