User Manual

H.265 VANGUARD II Series
49
4.1.8.5 Face Detection
When camera detects faces of moving people in a pre-defined area, the Face Detection
event will be triggered. You can configure some event actions like event recording, Email
alert or pop-up full screen when an event is triggered.
To configure the Face Detection settings:
1. Check the Switch checkbox to enable the function of the channel.
2. In the Setup field, click to set up the detection areas. Please refer to 4.1.8.5.1
Configuring Face Detection Area for more details.
3. Click the Apply button to save the settings.
4. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.3 Intelligent Alarm.
5. If you want to activate the intelligent recording function, you need to configure the
recording schedule. Please refer to 4.1.8.9 Record Schedule.