User Manual

H.265 VANGUARD II Series
47
4.1.8.4 Pedestrian Detection
When camera detects moving people or vehicle in a pre-defined area, the Pedestrian
Detection event will be triggered. You can configure some event actions like event recording,
Email alert or pop-up full screen when an event is triggered.
To configure the Pedestrian Detection settings:
1. Check the Switch checkbox to enable the function of the channel.
2. In the Level field, select among Far, Middle and Near. Far level is recommended to
detect objects in long distance. Near level is recommended to detect objects in short
distance.
3. In the Setup field, click to set up the detection areas. Please refer to 4.1.8.4.1
Configuring Pedestrian Detection Area for more details.
4. Click the Apply button to save the settings.
5. To further set up the alarm notifications, click the Alarm button to enter the Alarm setup
page. Please refer to 4.3.3 Intelligent Alarm.
6. If you want to activate the intelligent recording function, you need to configure the
recording schedule. Please refer to 4.1.8.9 Record Schedule.