User Manual

H.265 VANGUARD II Series
35
Mirror: Check the box to enable the Mirror function. The image will be rotated horizontally
around a vertical axis.
Hallway Mode: Check the box to enable the Hallway display function (9:19).
Angle Rotate: Select a rotate angle.
Backlight: Select Enable to enable the BLC (Backlight Compensation) function.
- BLC Level: Adjust the level for the BLC function.
- BLC Area: Select an area to apply the BLC function.
3D Noise Reduction:
 Auto: Select Auto for the camera to automatically turn on the 3DNR function.
 Manual: Select to turn on the 3DNR function based on the setup Level.
 Disable: Select to disable the 3DNR function.
DWDR: Select Enable to enable the DWDR function and then you will have to adjust a Level
for the WDR function.
HLC: Select Enable to enable the HLC function and then you will have to adjust a Level for the
HLC function.
AGC: If you select Manual in the Shutter field, set up the AGC for the camera. The lower the
AGC level, the lower the video signal and the noise.
White Balance:
 Auto: Select for the camera to automatically adjust the white balance.
 Manual: Select to adjust the Red, Green, Blue values yourself.
 Indoor: Select Indoor if your camera is installed in an indoor environment.
Shutter:
 Auto: Select for the camera to automatically adjust the Shutter.
 Manual: Select to manually adjust the shutter speed. Select a speed in the Time Exposure
field. Also set up the AGC in the AGC field above.
Time Exposure: If you select Auto in the Shutter field, the camera will automatically apply a
max. shutter speed. If you select Manual in the Shutter field, select a shutter speed from the
drop-down list.
Defog Mode:
 Auto: Select Auto for the camera to automatically turn on the Defog function.
 Manual: Select to turn on the Defog function based on the setup Level.
 Disable: Select to disable the Defog function.
Click Default to restore to default settings.