User Manual

H.265 VANGUARD II Series
30
1. Click Add to bring-up the Add IP Camera page.
2. Click Search to search for the IP cameras on the network. Note that the IP cameras that
have been added to the DVR will not be displayed.
3. To select an IP camera, click an IP camera on the list, the clicked IP camera will be
highlighted with a blue background.
4. Configure the IP camera settings at the lower section.
IP Address/Domain: Input the IP address or domain name of the IP camera.
Alias: Input a channel name for the IP camera.
Port: Port of the IP camera.
Protocol: Select a protocol. For Custom protocol, please refer to 4.1.1.3 Manage Protocol.
User Name: Input the user name of the IP camera.
Password: Input the password of the IP camera.
Bind Channel: Select a channel for the IP camera to be applied to.
5. Click Add and the IP camera will be added to the channel.
4.1.1.2.2 Manually Add IP Cameras