User Manual

H.265 VANGUARD II Series
146
On the PTZ Panel, click PTZ Model to display the Preset/Tour Control panel.
To set up Preset Points:
1. Select a PTZ camera by clicking on it on the Live View window.
2. Use the direction buttons or Zoom/Focus/Iris buttons to search for
a preferred location.
3. Click the + button to add this location as a preset point, the preset
point should be added on the list below.
4. Follow Step 2-3 to set up multiple preset points.
5. To go to a preset point, click the button; to delete a preset
point, click the button.
To perform the Tour function:
1. Set up the preset points in advance. Select an interval time for
each preset points.
2. Click the Start Tour button , the PTZ camera will start
cruising based on the preset points with the dwell time.
3. To stop the Tour function, click the Stop Tour button .
On the PTZ Panel, click Coaxial to display the UTC Control panel. You can use this panel to
display the analog camera OSD menu and configure the camera OSD settings.
Note: For EverFocus’ PTZ cameras, only the UTC-supported PTZ cameras support the UTC
function.
1. Select a camera and then
select UTC1 or UTC2 from
the Coaxial drop-down list.
2. Click the button, the
camera OSD menu will be
displayed.
3. Use the Up / Down / Left /
Right buttons to select
among the OSD menu items
and use as the Enter
button to enter the setup
menu.