User Manual

H.265 VANGUARD II Series
120
4.9.1.2 Date and Time
【Date and Time】
Date: Set up the date for the system.
Time: Set up the time for the system.
Date Format: Select a format for the date.
Time Format: Select a format for the time.
Time Zone: Select a time zone relevant to your region.
【NTP Settings】
The NTP (Network Time Protocol) function allows your DVR to automatically sync its clock
with a time server. This gives it the ability to constantly have an accurate time setting (your
DVR will periodically sync automatically).
Enable NTP: Check the box to enable the NTP function. When NTP function is enabled, the
system will calibrate the system time at 00:07:50 daily and every time when the system is
started up.
Server Address: Select a NTP server.
Update Now: Click to calibrate the system time.
【DST Setting】
The DST (Daylight Saving Time) function allows you to select the amount of time that
Daylight Saving has increased by in your particular time zone or region.