Installation Guide

1
1. Overview
1.1 Front Panel
PWR HDD
2
1
3
No.
Name
Description
1
IR Receiver
Receiver for signals from the IR remote control.
2
LED Indicator
Power: When power is on, the LED will continue lighting in green.
HDD: When power is on, the LED will continue lighting in red. When
HDD is reading/writing data, the LED will flashes red.
3
USB2.0 Port
USB2.0 port for connecting to a mouse or an external storage device.
1.2 Rear Panel
1 2 4
3 5
6 7
8
9
10 11 12
13
No.
Name
Description
1
e-SATA Port
Connects to external HDD.
2
Audio Input
Connects to audio input devices, such as microphones. Note that the
microphones with a (built-in) amplifier and external power supply are
required.
3
Audio Input
(5-16)
Connect the supplied D-Sub Cable Harness to this port for audio input
(CH5-16) connection. Note the microphones with a (built-in) amplifier
and external power supplies are required.
4
CVBS
CVBS video output connection.
5
Audio Output
Connects to an audio output device, such as speakers. Note that the
speakers with a (built-in) amplifier and external power supply are
required.
6
Video Input
Connects the AHD/TVI/SD cameras to the Video Input.