IP 99 Series EIP220 Network Camera Install Guide Copyright © EverFocus Electronics Corp, Release: Oct.
This document shows you how to install IP99 camera step by step 1. Read the product introduction and package content 2. Read the specification and diagram 3. See hardware overview 4. Do wiring and installation 5. Do network connection Product introduction IP99 series IP products provides built-in, easy-to-use, and browser-based management software that can manage, view, record multiples IP99 cameras and video servers. No additional software required.
high quality images. User can view the images through any web browser. Widely applicable — IP99 series provides live images on the network, it enhances functionality of traditional television system. IP99 series allows direct connection to visit remote video through standard IE, user can view local image as well as remote video any time any where. IP 99 series can be used for alarm surveillance, traffic surveillance, banking application, parking lot, factory surveillance, industry surveillance.
SPECIFICATIONS CAMERA Pickup Device Video Format Pixel Effective Sensitivity Day & Night 1/3" Sony Super HAD Interlaced CCD NTSC/PAL NTSC: 510 (H) x 492 (V); PAL: 500 (H) x 582 (V) 0.3 Lux / F=1.2 Yes Lens Video Output Video Output Resolution C/CS Mount BNC socket, composite 1 V p-p / 75Ω 380 TVL AUDIO Audio Input Audio Format One way audio A-Low/u-Low VIDEO Electronic Shutter Backlight Comp.
MOTION DETECTION & ALARM Physical Alarm I/O 2 CH alarm input/2 CH alarm output Notification Record video to PC , Send email notification ( jpeg file ), FTP upload upon motion detection and alarm trigger Manual Trigger Alarm Output Yes, High or Low Button in Alarm Setting PLAYBACK Playback Video Source Playback Speed Local PC Forward x2, x4, x16, x32. Rewind x1, x2,x4,x16,x32 POWER Power Supply Power Consumption 12 VDC 9W max PHYSICAL Weight Dimensions 340g/0.749lbs 66.5mm(W)x143.3mm(D)x59.
Hardware Overview 7 6 1 3 1. 2 4 5 Reset: loading factory default configuration by pressing the button, which is inside this hole. Please insert the keen-edged device to the hole for 10 seconds. 2. RS485(Pelco-P/Pelco-D): RS 485 Connector functionally reserved for PTZ control. 3. Power LED: Power LED will light up when power is ON. 4. Ethernet RJ-45 port: Connect to LAN via this standard RJ-45 connector. 5. Power 12VDC: Connect with power adaptor 6.
Installation a. Mount camera bracket BA-01, BA-03 (optional) on the wall. And screw it on the wall firmly. b. Mount Camera on the bracket c. Connect a lens on the camera. Connect DC iris plug if using DC auto iris lens d. Connect 12VDC power. e. Connect BNC to testing monitor and adjust lens focus and zoom, view angle. f. Connect CAT5 cable and do network connection. Refer to 3. Network Connection g. Install IP searcher tool and assign IP address if you connect to multiple cameras.
2. Direct High Speed Connection Direct High Speed Connection connect camera directly to modem without a router. You need to assign the IP address you obtain from internet service provider to IP camera/ Encoder. To access the camera, just type http:// IP address of your internet provider. If you have a dynamic IP address, this connection doesn’t work for you. 3. One to one connection from PC to IP camera With a cross-over cable, you can connect directly without switching.
