User`s manual

PowerVideo Plus
70
12.3 Configuring the GPS Fences
You can display the GPS fences predefined on the Mobile DVR on the E-map.
To display the GPS Fence:
1. On the Web interface of the Mobile DVR, click the Alarm/Event button and click GPS in
the left-side menu. Select GPS Fencing from the drop-down list and configure the
settings below. Click the Apply button to apply the settings.
Figure 12-7
2. On the Main Screen of the PowerVideo Plus, click GPS and click GPS Fencing, the
following window appears.
Figure 12-8
3. Select a device from the Vehicle Name drop-down list and click the Show Fencing button,
the GPS Fence displays on the E-map. Click the Set Fencing button to save the settings.