User`s manual

PowerVideo Plus
44
• On the Alarm Server:
a. Right-click the Alarm Server icon, click the Notification Settings, the Login dialog box
appears.
Figure 10-6
b. Type the User Name, Password and then click the Login button. The Notification
Settings window appears.
c. Click the Option tab, select a protocol type and type the Alarm Server Port matching
the ones you’ve set up on the IP device.
Figure 10-7
d. Click the Network Alarm Settings Check tab, the following window appears.
Figure 10-8
e. Click the Get Network Alarm Settings button, the connected devices will be
automatically detected and listed.