User`s manual

PowerVideo Plus
14
Chapter 3 Live View
You can manage the live video on the display window. Drag a camera from the Device List
and drop it on the display window. Right-click the Live View window, the tool bar appears on
the upper right corner.
Live View Tool Bar
Figure 3-1
The Live View Tool Bar
2 8
Tool Bar on IP camera
Tool Bar on NVR
2 4 5 6 7 8
Tool Bar on DVR / Mobile DVR
11
3
39
2 4 5 7 8
4
3
1
5
10
Figure 3-2
No. Name Description
1 Pause
Click to temporarily disconnect the live stream. Please
refer to 15.2 Temporarily Disconnecting (Mobile) DVR Live
Streams.
2 Unpin
Unpin the live view from the Display Window. Click the
button again to pin back.
3 Audio
Click to enable / disable the audio function.
4 Take a Snapshot Click to take a snapshot to print out.
5
Configure Settings
Click to access the Web interface of the IP device for
configuration.
6 Quick Playback Play back the videos from the predefined interval.
7 Channel
Channels: Switch between channels from the DVR.
Sub-stream: Click to enable / disable sub-stream. By
default, the live view is displayed in sub-stream.
8 Close Stream Click to close the live view window.
9 Full Screen Click to display the live view in full screen.
10 Start Record Click to start / stop recording (IP camera only).
11 Stream Select a stream to display the live view (IP camera only).