User`s manual

PowerVideo Plus
37
5. Shortcut jump to preset #1 ~ 9:
a. Click the desired number’s button without clicking any other buttons.
b. The camera will automatically jump to that preset position.
6. To start the auto pan function, click the Auto Pan button.
7. To start the pattern operation, which is the “0” Tour in EverFocus and Pelco PTZ cameras:
a. Click the Pattern button.
b. If more than one pattern has been programmed, click the number of the desired
pattern.
c. Click the Go button.
8. To run a Tour:
a. Click the Tour button.
b. Click the number of the desired tour.
c. Click the Go button.
d. To remove a tour (if supported by the camera), click the Tour button, click the
number of the desired tour and click the D (Delete) button.
Click the C (Clear) button to clear the digit in the number display.