User`s manual

PowerVideo Plus
36
Chapter 11 PTZ Control
You can remotely control the PTZ cameras connected to the DVRs. On the Main Screen, click
Devices and select PTZ Control. The PTZ Settings panel appears.
Figure 11-1
The following actions can be performed using the PTZ Settings Panel:
1. Use the Direction buttons (up, down, left, right) to move the camera to the desired
direction and angle.
2. Click or to adjust the value of Zoom / Focus / IRIS.
3. To set up a preset position (if supported by the camera):
a. Move the PTZ camera to the desired position using the direction buttons.
b. Click the Preset button.
c. Select a number for this preset position (this will be displayed in the preset ID
number box)
d. Click the S (Set) button to set up.
e. To delete a preset position, click the Preset button, click the number of the desired
position and click the D (Delete) button.
4. To jump to a preset position:
a. Click the Preset button.
b. Click the number of the desired position.
c. Click the Go button (under button 9).