User`s manual

PowerVideo Plus
22
7.2 Creating a Group
You need to create a group before start using the dynamic E-Maps.
1. On the Main Screen, click the Dynamic E-Maps button, the E-Map window appears
(Figure 7-1).
2. To create a group to include multiple E-Maps, click the Map Set button and click New
Map Set. Right-click on the created group and select Rename to rename it.
3. To add an E-Map to the created group, right-click on the created group and click Add
Map. Right-click on the created map and select Rename to rename it. You can repeat this
step to add multiple E-Maps.
4. To locate the E-Map image, drag and drop the E-Map image on the right-side of the
E-Map window. Or right-click on a created E-Map and click Load Image File.
5. To locate the cameras on the E-Map, drag and drop the cameras from the Device List
(No.10, Figure 1-2) to the created E-Map. You can change the direction of the camera
icon by right-clicking on the camera icon and click Rotate Right / Rotate Left.