User`s manual

PowerVideo Plus
21
Chapter 7 Dynamic E-Maps
You can configure a dynamic E-Map alert to lay out the locations of triggered cameras and
alarms within a floor plan. When a motion, video loss or input trigger is detected, the color
of the camera icon will turn red or yellow for alert (red for video loss and yellow for triggered
cameras and alarms). You can also right-click the camera icon and select View Camera to see
its live view. By doing so, the camera icon will turn green.
Figure 7-1
You have to enable the Alarm Server for using the Dynamic E-Maps function. On the Main
Screen, click Option and click Start Alarm Server. The Alarm Server will be minimized to
the system tray.
7.1 Activating the Dynamic E-Maps
You have to configure the settings on the Web interfaces of the DVR / Mobile DVR or IP
cameras, and then configure the protocol and port settings for the Alarm Server on the
PowerVideo Plus. For details, please refer to 10.1 Activating the Alarm Function.