User`s manual

 PowerVideo Plus



16


Chapter4Recording
YoucanrecordlivevideosfromtheconnectedIPcameras.ClicktheStartRecordbutton
ontheLiveViewToolBartostart/stoprecordingthecameraliveview.
 
Figure4‐1
4.1 ChangingtheRecordingPath
Bydefault,theliveviewrecordingsoftheIPcamerasaresavedatC:\Program
Files\Everfocus\PowerVideoPlus.Followthestepsbelowtochangetherecordingpath.

1. OntheMainScreen,clickOptionandclickConfigureRecordStoragePath.

Figure4‐2
2. Clickthe RecordStoragePathtab,clicktheAddNewPathbuttonandselecta
storagelocation.Thenewpathwillbelistedinthestoragepathlist.
3. Doubleclickontheaddedpathtoenableitasthedefault path.Thecolorofthewordings
willchangetoredtoindicatethepathhassetupasthedefaultpath.
4. YoucanoptionallyenableRecordingfile(s)overwrite,ifdiskdriveisfull.
5. Clickthe Savebuttontosavethesettings.