User`s manual

PARAGON960 X4
85
6.6 Display Setting
You can configure the settings for displaying the camera / DVR information on the live view
image. You can also set up the sequencing order for the Main / Call monitor.
6.6.1 Monitor OSD
Check the boxes under the Main Monitor / Call Monitor fields will display the selected items
on the live view image.
Figure 6-21
Main Monitor / Call Monitor
Title: Check the box to display camera titles.
Date/Time: Check the box to display current date/time.
Event Status: Check the box to display event status.
HDD Status: Check the box to display hard drive status.
Playback Date/Time: Check the box to display playback date/time (only for main monitor).
Playback Status: Check the box to display playback status (only for main monitor).
Text Insert: Check the box to display text inserted.
Screen Mode: Select the suitable screen mode. Selections are: 1920x1080; 1280x1024;
1024x768; 800x600. Please see to 2.3.2 Display Aspect Ratio for more details.
Output Device: Select your Main Monitor to be HDMI or VGA output device. If you select
HDMI output device to be the Main Monitor, the VGA output device will be the Call Monitor,
and vice versa. The BNC output device will always be the Call Monitor.
Note: If you select VGA output device, resolution selected should be supported by the
monitor. Resolution selected higher than the monitor can support may cause the screen to
black out after rebooting the DVR.