User manual

68
6.8 DIRECT HIGH-SPEED MODEM CONNECTION
Straight-Through Ethernet Cable Pinouts:
The Figure below shows the pin configurations for a straight-through cable (standard network cable).
Connection Procedure:
 The first step is to purchase or make a straight-through cable (standard network cable). We recommend
purchasing one if you have never made a straight-through cable. Please remember you can not use a cross-over
network cable for this application.
 Once you have a straight through cable plug one end into the LAN port on the back of the recorder and the other
into the high-speed modem.
 Log into the EverFocus DVR menu and go to the Network Setting Menu.
 Input the Static IP address, the Subnet Mask, and the Gateway that you obtained from your internet service
provider.