User manual

58
Sequence
OK
OK
OK
Monitor
OK
OK
OK
Zoom
OK
OK
NO
Search
OK
OK
NO
Copy
OK
OK
NO
Config.
OK
OK
OK
View Covert Cameras
OK
OK
NO
Logout
OK
OK
OK
Configuration Menu of the DVR
User Level and Right
RIGHT
ADMINISTRATOR
MANAGER
OPERATOR
Express
OK
NO
NO
Camera
OK
NO
NO
Record/Play
OK
NO
NO
Alarm/Event
OK
NO
NO
Schedule
OK
NO
NO
Network
OK
NO
NO
Disk
OK
NO
NO
Display
OK
OK
NO
System
OK
*
**
Info
OK
OK
O
K
Log
OK
NO
NO
*Managers can only access the USER submenu of the System Setting menu. They can only change their own
passwords and that of “operator” IDs.
**Can only access the USER submenu; can only change own passwords.
5.9.4 I/O Control
On the right is a screenshot of the I/O Control Setting Menu. This
menu is used to define the settings for controlling the DVR through
RS485, and for DVR control of attached PTZ cameras.
RS232
Baud Rate: This field is to set the speed at which is used to
transmit instruction or information through the RS232 port on the
DVR. There are eight different speeds: 1200 BPS, 2400 BPS,
4800 BPS, 9600 BPS, 19200 BPS, 38400 BPS, 57600 BPS and
115200 BPS.
Data Bit: This field is the data bit at which you will be transferring. There are two settings for this option: 8 or 7.
Stop Bit: This field is to set the stop bit for the RS232 connection. There are two different stop bits, 1 or 2.
Parity: This field is to select the parity level at which you will be connected. You can choose between None, Odd, or Even
parity levels.