User manual
1.5 REAR PANEL
During initial setup you will be connecting your DVR to mul
1)
Power Plug:
Plug the DC 12V power source provided into the power socket.
2)
Network Port:
RJ-45 port for
green LED is on, the
network connect
3)
RS-232 Connector:
This 9-
pin D
4)
RS-485 Connector:
F
or external
attached PTZ devices.
5)
Main:
This BNC port is for feeding
6)
Call:
This BNC port is the Call
7)
Main VGA:
This VGA
port is for
8)
Alarm In:
Connect up to 16 alarm input devices
9)
Alarm Out:
Connect up to 4 alarm output devices.
alarm out (form “C”).
10)
Video I
N and Video OUT connectors:
can also connect
equipment like monitors to the Video
11)
eSATA:
Used for
connecting an
12)
Audio IN:
Connect up to four
Audio IN cables.
input connection of your choice
13)
Audio OUT:
Only one Audio OUT cable can be connected.
6
During initial setup you will be connecting your DVR to mul
tiple input and output devices.
This is done via
Plug the DC 12V power source provided into the power socket.
10/100Mbps Etherne
t. There are two LEDs on the Ethernet connector
network connect
ion is active. The amber LED
flickers when
pin D
-Sub is for attaching RS-232 control devices.
or external
control via connected RS-485 keybo
ards and
This BNC port is for feeding
the Main Monitor video Out signal to a BN
C monitor.
Monitor output.
port is for
feeding the Main Monitor video Out signal to
a VGA monitor (Main Monitor).
Connect up to 16 alarm input devices
.
Connect up to 4 alarm output devices.
The connection o
ptions are COM,
N and Video OUT connectors:
Connect up to 16 cameras to
the Video IN connectors (top layer). You
equipment like monitors to the Video
OUT
connectors (bottom layer)
connecting an
external SATA HDD bay.
Audio IN cables.
Connect the
line level output of an audio preamplifier to th
input connection of your choice
.
Only one Audio OUT cable can be connected.
Connect to the line level input of an audio amplifier.
This is done via
the rear panel.
t. There are two LEDs on the Ethernet connector
. When the
flickers when
data is being exchanged.
ards and
for on-screen-display control of
C monitor.
a VGA monitor (Main Monitor).
ptions are COM,
N.C, and N.O types of
the Video IN connectors (top layer). You
connectors (bottom layer)
.
line level output of an audio preamplifier to th
e audio
Connect to the line level input of an audio amplifier.