User manual

1.4 FRONT PANEL
Your primary interaction with this
DVR will be through the Front Panel buttons and their corresponding buttons on the
included IR Remote Control. Take
a moment to
them often.
1) USB 2.0 ports (front): For
connecting
There’
s another USB port for connecting a USB mouse on the back panel.
2) DVD+RW Burner.
3) Channel buttons 1~16:
Press
4) Display: Press this button
to cycle between the info display types
5) Seq: Press this button
to enter the auto
The dwell time can be set in
the
see “Section 5.8.2
Display Setting >
6) Zoom:
Press this button repeatedly to toggle between 2x and 4x zoom. Press the Menu/Esc button to switch
zoom off.
7) Monitor:
Press this button to switch
this button to switch between two main monitors (BNC and VGA) if you have such main monitors connected. Just
remember to exit out of the setup menus before doing so.
8) Search: Press this button
to enter
“Search” section.
9) Copy: Press this button
to enter
section.
10) Screen Layout: Press
the type of layout you want for displaying your channel feeds.
4
DVR will be through the Front Panel buttons and their corresponding buttons on the
a moment to
learn where the buttons
are as the remainder of the manual will refer to
connecting
USB flash drives to copy/archive video
, or to
s another USB port for connecting a USB mouse on the back panel.
Press
a channel button to display that channel in full-
screen view.
to cycle between the info display types
(channel and
status bar
to enter the auto
matic sequence mode. This will show each channel feed in
the
“Display Setting” tab of the Menu. For more detail
Display Setting >
Main M/T SEQ”.
Press this button repeatedly to toggle between 2x and 4x zoom. Press the Menu/Esc button to switch
Press this button to switch
between the m
ain monitor and up to two call monitors.
this button to switch between two main monitors (BNC and VGA) if you have such main monitors connected. Just
remember to exit out of the setup menus before doing so.
to enter
the Search Menu. For more detail about the
Search fu
to enter
the Copy Menu. For more details about the
Copy fun
the type of layout you want for displaying your channel feeds.
DVR will be through the Front Panel buttons and their corresponding buttons on the
are as the remainder of the manual will refer to
, or to
do firmware upgrades.
screen view.
status bar
info).
matic sequence mode. This will show each channel feed in
sequence.
“Display Setting” tab of the Menu. For more detail
s about this function, please
Press this button repeatedly to toggle between 2x and 4x zoom. Press the Menu/Esc button to switch
ain monitor and up to two call monitors.
You can also press
this button to switch between two main monitors (BNC and VGA) if you have such main monitors connected. Just
Search fu
nction, please see the
Copy fun
ction, please see the “Copy”
the type of layout you want for displaying your channel feeds.