User`s manual

NVR8004X

4.7.6 Miscellaneous

You can upgrade the latest firmware, restore the factory default settings to the NVR,

upload / save the NVR configuration settings from / to the USB / computer or change the

language in this setup menu.

Figure 4-49

Remote Reboot: Click Reboot Now to restart the NVR via the Network.

Firmware: Shows the current firmware version of the NVR.

Firmware Upgrade: Click Browse to choose the firmware file and click Upgrade to upgrade

the latest firmware.

【Configurations】

Load Factory Default: Click to restore the NVR to factory default settings. The User

Account, Network IP Settings, and Time settings will not be affected.

Load From File: Click Browse to choose the NVR configurations file and Click Load to

upload the NVR configurations.

Save To File: Click to save the NVR configurations to the file.

Language: Choose which language the NVR uses.