User`s manual

NVR8004X

Tracking: Click the Tracking button to set up the tracking function which is functional only when

the selected PTZ camera is equipped with the tracking function.

Figure 4-12

To set up the Auto Tracking function:

1. Auto Tracking Start Point: Check the box to enable a camera position to which the camera

will return to after a tracking operation. Use the direction buttons to adjust the camera

view to a desired position where you want to set up the position as the Auto Tracking Start

Point. You can select the pan / tilt speed from the Speed drop-down list for controlling the

direction buttons. Adjust zoom, focus and Iris if necessary. Click Set to set the position as

the Auto Tracking Start Point.

Note: If the user did not set up a start point or the start point is disabled, the camera will

go back to track/monitor the initial point instead of the Auto Tracking Start Point, once

the tracked object exits in the camera’s field of view.

2. Pan/Tilt Limit: Check the box if you want to create a zone where the camera will track the

movement inside the zone only. Before clicking the Upper/Lower/Right/Left buttons, use

the direction buttons to adjust the camera view to a desired position where you want the

camera to track the movement in that zone. You can select the pan / tilt speed from the

Speed drop-down list for controlling the direction buttons. Adjust zoom, focus and Iris if

necessary. Click the Upper/Lower/Right/Left buttons to set up the Pan/Tilt limits (Left and

Right for the Pan limit; Upper and Lower for the Tilt limit).