User`s manual

NVR8004X
35
4.1.4 Camera Setting
Users can configure the detailed camera settings, PTZ and tracking functions in this setting
page.
4.1.4.1 Camera
Figure 4-7
Connected Channel: Check the box to enable the connection between the camera and the
NVR. If the box is unchecked, the system will disconnect the camera and stop recording.
Mask Channel: Check the box to mask the camera’s live view on the screen, but the
recording function is still on.
Channel Number: Select a desired channel for configuration.
Device Title: Enter a camera title.
Record Dual Stream: Select to enable or disable the dual streams recording function.
Record Mode: Select a recording mode from the drop-down list.
Normal+Event: Set all cameras to the Continuous and Event recording mode.
Event Only: Set all cameras to the Event only recording mode.