User`s manual

NVR8004X
10
2.3 USB Dongle Connection
Please connect your USB Dongle before powering on the NVR. If you turn on the NVR without
connecting the USB Dongle, the following window will pop up when accessing the NVR’s web
page. Please insert the USB Dongle and click Yes to continue the NVR.
Figure 2-9
This message window will pop up as long as the NVR cannot detect the USB Dongle. If so,
make sure the Dongle has been properly inserted and click Yes to continue.
If you increase the number of channels on your USB Dongle, you need to turn off the NVR
before inserting the USB Dongle. If you insert the Dongle while the NVR is on, you need to
reboot the NVR or else it cannot detect the added channels.
2.4 Turning On / Off the Power
Before powering on the NVR, please make sure the internal HDDs have been installed
properly, and the USB Dongle has been connected to the NVR. When you have completed the
basic cable connections, you are ready to turn on the NVR.
Once connect the supplied Power Cord to the power outlet, the NVR will be powered on. All
of the LED indicators on the front panel will light up for a second, but the System and Power
LED will remain light up. To turn off the power, simply unplug the Power Cord from the power
outlet. You can also press the Power button inside the front panel to turn on and off the NVR
without unplugging the Power Cord.