Manualshelf

User manual

ManualsBrandsEverFocus ManualsComputer equipmentNVR
919293949596979899100
NVR/DVR/Hybrid NDVR System
- 92 -
5.14 Counting Application
Count objects, people or vehicles passing through pre-defined detection zones.
To access this page, login with admin account or user account with privilege of configuring main system.
* Note: This function is not available under Lite license.
Camera List
Operation
Start Simulation
Options
Runtime
Camera List: Select which camera would enable counting application.
Operation:
Define detection zones: Defined the detection zone.
Define object size: Defined the size of the object to count.
Options: 1Way Counting will take objects going from Region 1 to Region 2 as one count. In 2 Way Counting
mode, it counts either going from Region 1 to Region 2 or from Region 2 to Region 1.
Runtime: Check the boxes to show the counting result on the screen and/ or show object bounding box,
which draws the shape of the object that the system detects in red squares. You can choose from the
drop-down menu of how long you want to reset the counting number.
Start Simulation: Click to test the setting.