User manual

NVR/DVR/Hybrid NDVR System
- 54 -
3.3 Encoding Option
3.3.1 Pre-record/ Post-record Time
The pre-record/ post-record function saves the recording data accordingly. For instance, to set up a 5
second pre-record time means the system will start saving the recording data 5 seconds before the event
happens.
Note: The maximum of pre-record/post record period is 60 seconds.
3.3.2 Record Mode
There are four recording modes to choose from. Choose the one that suits your scenario best.
Always Record:
Select this option to record the video continuously.
Boosting Record on Event:
This option enables you to record at lower frame rate at
regular times, and at higher frame rate under Smart Guard
triggered events.
*This feature is not available under NVR Lite License
Select this option to obtain the “Select Event” panel.
Choose from the list any Smart Guard or digital input
events or video analytics from the device. The chosen
event(s) will trigger the recorded action. Click OK.
Configure desired frame rates of normal and boosting
recording in the Video Encoder box.
Note: Please note it is required to enable ”Smart Guard”
from the Main Console panel before configuring “boosting
Original Video
Encoded Video
Video Encoder Record Mode Time Option