DVR User Manual
Table Of Contents
- 1 PRODUCT OVERVIEW
- 2 Installation
- 3 MOUSE AND FRONT PANEL OPERATION
- 3. GENERAL DVR OPERATIONS
- 4 DVR CONFIGURATION
- 5 Networking Overview
- 6 REMOTE OPERATION FROM BROWSER
- 7 EVERFOCUS DDNS SETUP
- 8 LINKSYS & D-LINK PORT FORWARDING
- 9 TROUBLESHOOTING
- APPENDIX A: TIMING OF ALARM MODES
- APPENDIX B: EXPRESS SETUP RECORDING VALUE SELECTION RULES
- APPENDIX C: REMOTE CONTROL
56
Fan Failure:
Figure 4-12 Alarm & Event Menu – Event – Fan Failure
Log: Check box to record fan failure events in the log.
Buzzer: Check box to enable buzzer when fan is not working.
Email Notify: Check box to enable email notification when fan is not working. Email operation requires
that valid email settings have been entered in the Network Setting/Email setup screen.
Network Alarm: Check box to send out a network alarm to client PC. (requires PowerCon software and
setting up Alarm Server in Network Setup menu)
Alarm Output: This will transmit a signal through the alarm output. It can be set to either “NONE” (not
active), “1”(active) or “2” (active).
Output Type: Output action will be Transparent and cannot be changed (alarm output remains as long as
the alarm condition is active).