User`s manual

 EZNPlusSeries
19

6.2 SettingUpthePlaybackFunction
NotethatthePlaybackfunctionwillnotbeactiveuntiltheuserhasinsertedamicroSDcardinthe
camera’smicroSDcardslot.ThecardmayalsohavetobeformattedintheSettingssubmenu.


6.2.1 Preparing the MicroSDCard
OnceyouinsertafunctionalMicroSDcardintotheslot,thePlaybackbuttonontheLivepageshould
becomeactivewithinseconds(seesection6.2.2below–thegreylettersshouldturnwhite).IFNOT,
dothefollowing:

1. FromtheLivepage,clickSettings>System>SDCard.Ifnocardhasbeeninsertedyet,theRemove
buttonshouldbefaded,indicatingthatnocardisbeingdetected.(Ifacardisinserted,andthe
Removebuttonisstillfaded,pullthecardoutandre‐insertit.)
2. Slidethecardintotheslotuntilitclicksintoposition.
3. TheRemovebuttonshouldbecomeactivewithinafewseconds,indicatingthecardisactive.
4. IftheRemovebuttonst aysfaded,clicktheFormatbuttontoformatthecard.NOTE:Alldataonthe
diskwillbedeletediftheFormatbuttonisclicked.












