User`s manual

EZN Plus Series
15
10. Snapshot
Click the Snapshot button to save a snapshot of the video image currently being displayed. The
location on your computer where the snapshot data will be saved can be specified in “Settings >
User Config” (see 7.2 User Config).
11. Play Audio / Transmit Audio
Click the “Play Audio” (speaker) and “Transmit Audio” (microphone) buttons to switch the sound
on/off for the speaker and microphone, respectively (if such external devices have been connected
to the camera directly or via the network).
12. Manual Control
– Trigger Event
Press the “Trigger Event” button to trigger an event directly from the Live View window. If you have
configured an event (in the Event submenu) that will trigger a reaction (like a recording) when a
Manual Trigger event occurs, clicking this button will trigger that reaction. You can select what that
reaction will be. You can, for instance, set the camera to record the audio/video feed to the SD card
on board the camera. You can then click on the Playback button to open the Playback page and
search for and play all such recordings that had been stored on the card. Such event actions will be
effective once they have been configured in the “Event” menu (see 7.7 Event).
– Reset Alarm
Press the “Reset Alarm” button to reset the alarm output remotely.
13. Lens Control
These buttons control the lens actions. Click the icon to focus closer quickly. Click the
icon to focus closer slowly. Click the icons to focus farther quickly or slowly. Click the
icons to zoom in quickly or slowly. Click the icons to zoom out quickly or slowly.
14. Status Display (info line that can be placed above video box or at bottom of page)
This shows the name of the camera that is currently active or being configured, current date/time
and current frame rate. You can activate these info displays in the Settings > User Config page (see
7.2 User Config).