User`s manual
EZN Plus Series
14
3. Press the button to enter the Settings page. On the Settings page, there are
8 submenu sections: [System Info], [User Config], [Network], [Video], [Audio], [User], [Event] and
[System]. Click on the section buttons to open their configuration fields. See the Settings section
below for more information.
4. Press the button to exit the system and close this browser page.
5. Video Stream
Select the Video Stream (Stream 1, Stream 2 or Stream 3) that will be displayed in the video box on
the right. Stream 2 and Stream 3 are only selectable if you have enabled the stream. The default
setting is Stream 1 only. See 7.4.1 Multi Streaming.
6. View Size
Use this to select the appropriate view size and shape of the video box on the right. A smaller size
might increase transmission speed and video quality.
7. Digital Zoom
Click the Zoom In / Zoom Out buttons or roll the mouse wheel to zoom in / out the camera live view
up to 10x. Clicking on a magnified image will re-center the image around that point.
8. One Push
This function is only available for EZN3160 Plus / 3260 Plus. The One Push button can be displayed
on the live view window by enabling the Show One Push Buttons function on the User Config < Live
View Config Setting page (see 7.2.1 Live View Config). To enable the button (turned from faded to
clear), on the Video < Advanced Setting page, select One Push from the White Balance Settings
Mode drop-down list, and click the Apply button. Once this is done, pressing the One Push button
on the Live View Window will instruct the camera to adjust the white balance settings, and these
settings will be active until the button is pushed again. This is like a “semi-automatic” way to adjust
white balance to suit the user, if the Auto or Manual mode does not give the result the user wants.
9. Record
The Record button is used to record the current video stream. Click the Record button to start /
stop recording. This icon is only for one-minute video recording. To record long-period recordings,
please set a recording schedule (See 7.7.5 Schedule). The location on your computer, where the
image files will be saved to, and file size can be specified in the submenu (see 7.2 User Config).