User`s manual

PoE Switch
26
Figure 4-3
In Port Based Mode you see a matrix of your 10 Ports. Simply select the port on
top screen you want to configure, click on Read, and then select or deselect the
ports that are on the same VLAN group. In this configuration mode you do not
need to worry about defining VLAN groups and VLAN IDs.
VLAN Member in Tag Based Mode
In Tag Based Mode you need to define and configure your VLAN groups. Assign
the VLAN ID, select the VLAN member ports, assign the PVID and check the
configuration result.