User`s manual

PoE Switch
19
 Speed: When the Auto-Negotiation column is set as Disable, users have to
set the connection speed to the ports ticked.
 Duplex: When the Auto-Negotiation column is set as Disable, users have to
set the connection mode in Half/Full to the ports ticked.
 Pause: Flow Control for connection at speed of 10/100Mbps in Full-duplex
mode.
 Backpressure: Flow Control for connection at speed of 10/100Mbps in
Half-duplex mode.
 Addr. Learning: When the Auto-Negotiation column is set as Disable, users
have to set this column as Enable or Disable.
 Select Port No.: Select the port/ports you want to apply to. You can select one or
multiple ports here.
Click Update to have the configuration take effect.
 Current Status: Displays the status of each ports.
This field indicates the port 6
is link up and run as 100M Full, Flow Control Enabled.
 Setting Status: Displays the configuration of each ports.