User`s manual

PoE Switch
13
 Subnet Mask: Assign the subnet mask to the IP address.
 Gateway: Assign the network gateway for industrial switch.
 IP Configure: Select the Static or DHCP.
The default setting is Static, you can manually configure the IP Address settings.
Select DHCP mode means the switch acts as the DHCP client and the switch will
try get the IP Address from the DHCP server.
Click Update to update the new settings.
It will show “update successfully” then press Reboot button. It will enter user
login screen automatically
Click DHCP -> Update, you can see the warning message.
Note: After changed to DHCP mode, the switch must be restarted to get new IP
address, however, since the switch only provide web management, it is hard for
user to find its new IP. Please don’t try this mode without pre-configured DHCP
setting in DHCP Server.