User`s manual

EPN4122/4122i/4220/4220i

To move the camera in a preconfigured sequence consists of a selection of Patterns

and Preset Positions, click the Tour button, select a tour number and then click the Go

button.

Note: To use this function, you have to set up at least one tour on the PTZ Settings

page. See 7.5 PTZ.

To activate the Auto Tracking function in the Auto Pan mode, click the A.Pan(T)

button, select 1 or 2 (1 for the preconfigured point-to-point pan; 2 for endless

360°pan) and then click the Go button.

Note: To use this function, you have to set up an auto pan sequence on the PTZ

Settings page. See 7.5 PTZ.

To activate the Auto Tracking function in the Tour mode, click the Tour(T) button,

select a tour number and then click the Go button.

Note: To use this function, you have to set up at least one tour on the PTZ Settings

page. See 7.5 PTZ.

Numeric

Buttons

Click to enter the number for the selected action.

Black

Area

Displays the selected number.

Go Click this button to activate the selected action number.

Clear Click this button to clear the entered number.