User`s manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. General Operation
- 4. OSD Root Menu
- 5. Search and Playback
- 6. Configuration
- 7. Remote Access to the NVR
- 8. Specifications
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: IR Remote Control
ENVR8304D-8CH / ENVR8304E-8CH
69
6.1.6 Adjust
Figure 6-12
Camera: Select a desired camera for adjusting the following settings.
Ratio: Select 4:3 or 16:9 display aspect ratio of a camera, and its video will be displayed in 4:3
or 16:9 format on that channel screen. Please refer to 2.3.4 Display Aspect Ratio for more
details.
Connected Channel: Check the box to enable the connection between the camera and the
NVR. If the box is unchecked, the system will disconnect the camera and stop recording.
Mask Channel: Check the box to mask the camera’s live view on the screen, but the
recording function is still on.
Note: Whether the following functions marked with a “*” will be enabled or not depends
on the connected IP camera. If the IP camera doesn’t have the any one of these functions,
the function will not be enabled. The setting options will also vary according to the IP
cameras you selected. For more details, please refer to your IP camera’s user’s manual.
* Profile Setting: Select Day Mode or Night Mode. It is designed for user to easily have a best
image quality of the camera in the daytime and night time.
* Profile Mode: Select a desired profile mode (Vivid/High Contrast, Standard, More Detail and
User Define) to adjust image quality.