User`s manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. General Operation
- 4. OSD Root Menu
- 5. Search and Playback
- 6. Configuration
- 7. Remote Access to the NVR
- 8. Specifications
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: IR Remote Control
ENVR8304D-8CH / ENVR8304E-8CH
42
4.2 Layout Switching
The NVR have 4 screen division types available. The seven layouts are shown as below:
Figure 4-4
To change layout, follow the steps below:
Right-click to bring up the OSD Root Menu and click the Layout icon. Click on the desired
layout.
4.3 Channel Switching
You can switch the selected camera to a specific channel. Follow the steps below:
1. On the live view screen, select a camera, the selected camera will be highlighted with a
red frame.
2. Right-click to display the OSD Root Menu.
3. Click the Channel icon , the Channel Bar appears.
Figure 4-5
4. Select a channel, the selected camera will be switched to that channel.