User`s manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. General Operation
- 4. OSD Root Menu
- 5. Search and Playback
- 6. Configuration
- 7. Remote Access to the NVR
- 8. Specifications
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: IR Remote Control
ENVR8304D-8CH / ENVR8304E-8CH
34
3.2 Forget Your Password
1. If you forget your password, please email the Serial Number of the NVR to
techsupport@everfocus.com, and then EverFocus will send you a verification code.
2. Input this verification code in the Password field of the Login window within 24 hours,
and check the Verification Mode box.
Figure 3-3
3. Click Login to log in the NVR.
Note: This verification code is effective within 24 hours only, so please set up a new
password in the System Setting page (refer to 6.8.4 User Management).
3.3 Opening OSD Root Menu
1. Right-click the mouse, the OSD Root Menu appears.
Figure 3-4
2. Click on any icon to enter the setup menus.
3. Click the button on the top-right corner or right-click to close the OSD Root
Menu.