User`s manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. General Operation
- 4. OSD Root Menu
- 5. Search and Playback
- 6. Configuration
- 7. Remote Access to the NVR
- 8. Specifications
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: IR Remote Control
ENVR8304D-8CH / ENVR8304E-8CH
29
Select Use the following IP address. Assign an IP address of 192.168.1.2, a
Subnet Mask of 255.255.255.0, and a Default Gateway of 192.168.1.1 and then
click OK.
Figure 2-27
Restart both of the computer and the NVR.
To access the NVR from the computer, simply open Internet Explorer and in the
address bar type: http://192.168.1.3