User`s manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. General Operation
- 4. OSD Root Menu
- 5. Search and Playback
- 6. Configuration
- 7. Remote Access to the NVR
- 8. Specifications
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: IR Remote Control
ENVR8304D-8CH / ENVR8304E-8CH
167
Appendix C: IR Remote Control
The IR remote control is an accessory to enhance the convenient operation of the NVR. You can
perform all the settings and operations from the remote control. The effective distance is up to
33 feet line of sight.
ID number here must correspond to the
“IR Remote ID” set up in the “I/O Control Menu”.
Channel keys #1~8
The buttons are used to select a DVR when
there is more than one DVR installed in the
same environment. Selecting an incorrect DVR
ID will prevent the DVR from responding to
commands from the Remote Control.
Appendix
C