User`s manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. General Operation
- 4. OSD Root Menu
- 5. Search and Playback
- 6. Configuration
- 7. Remote Access to the NVR
- 8. Specifications
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: IR Remote Control
ENVR8304D-8CH / ENVR8304E-8CH
142
7.5.2.2 PTZ
You can set up the Preset, Auto Pan, Tracking, Pattern and Tour settings in this page.
Figure 7-23
【Camera (1~16)】: Shows the PTZ camera live view. You need to select the PTZ camera from
the Channel Number drop-down list in the Camera setting page (see 7.5.2.1 Camera) before
configuring the PTZ settings.
【PTZ Control Pad】:
Click the direction buttons to force the
camera to turn into that direction
Click to stop thet current action, such
as Auto Pan, Tour or Pattern
Click to Zoom In/Out or Focus Near/
Far
Click to widen/narrow down the IRIS
opening
Figure 7-24
【Speed】: Select a pan and tilt speed from the Speed drop-down list for the camera to move to
the directions when you use the direction buttons during the configuration period