User`s manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. General Operation
- 4. OSD Root Menu
- 5. Search and Playback
- 6. Configuration
- 7. Remote Access to the NVR
- 8. Specifications
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: IR Remote Control
ENVR8304D-8CH / ENVR8304E-8CH
132
7.3 Browser Security Setting
7.3.1 Installing ActiveX Controls
Follow the steps below to install the ActiveX Controls when you first connect to the NVR’s
IP address. If you do not see the images below, your security settings may be too high. If so,
go to “Section 7.3.2 Enabling ActiveX Controls.”
1. You may also prompt to install the MSXML file. Please right-click the yellow bar and
select “Run Add-on…”
Figure 7-9
2. Install the MSXML file when prompted to do so.
Figure 7-10
3. Now you will be able to see the remote live page.
Figure 7-11
4. Please refer to 2.6 Checking the Dynamic IP Address to adjust the settings of the User
Account Control if you still can’t see the remote live view.