User`s manual
Table Of Contents
- 1. Introduction
- 2. Installation
- 3. General Operation
- 4. OSD Root Menu
- 5. Search and Playback
- 6. Configuration
- 7. Remote Access to the NVR
- 8. Specifications
- Appendix A: Network Overview
- Appendix B: Linksys & D-Link Port Forwarding
- Appendix C: IR Remote Control
ENVR8304D-8CH / ENVR8304E-8CH
117
You can further configure each user account and its settings individually, see the steps
below:
1. Click on a user account (Figure 6-57).
2. Click the Add, Copy or Edit button, and the following page appears.
Figure 6-58
User Name: Click to bring up the keyboard and input the desired user name.
User Group: Select a user group (access level).
Status: Select to enable or disable the user account.
Password: Input the password.
Confirm: Enter the same password again to confirm.
Camera Access: Click to bring up a new setting page (figure 6-59), and check the
boxes to enable the live, playback or PTZ functions of the cameras for local or remote
access.
User Right: Check the boxes to enable the functions for the user account.