User`s manual

ENVR8304D-8CH / ENVR8304E-8CH
103
6.6.3.2 www.dyndns.org
Figure 6-44
DDNS Service: Select www.dyndns.org
from the drop-down list.
Host name: Host name created through the dyndns account.
User name: User name of the dyndns account.
Password: Password of the dyndns account.
Confirm: Input the password again to confirm.
Setup Steps:
1. Apply for a host name from www.dyndns.org.
2. Make sure that the DNS Server 1 is set up correctly (see DNS Server 1 in 6.6.1 LAN &
WAN) or the DDNS will not work.
3. Select
www.dyndns.org from the DDNS Service drop-down list.
4. Enter the host name in the Host Name field. Note that the name of the NVR cannot
include a space, or a dot (period) or any special characters particularly ~ ! @ # $ % ^ & *
( ) + < > " ; : . , _
5. Enter the User Name / Password of the dyndns account.
6. The setting is complete. And you should now be able to remotely connect the NVR by
typing the name you created into the address bar. Example:
http://hostname.dyndns.com
Note: If you are connecting through a router, make sure that you have opened up all the
required network ports in the “Port Forwarding” section of your router’
s setup options.
The default port of the NVR
is 80. To set up Port Forwarding, please consult the manual of
the router.