Installation guide

ENVR8304E-8CH
5
Optional Accessories
•
EKB200 (USB controller keyboard: connect
to the PC or the NVR to control the PTZ
cameras connected to the NVR).
•
EKB500 (RS-485 keyboard: connect to the
RS-485 port to control the PTZ cameras
connected to the NVR).
•
EDA450 (eSATA Storage Device: connect to
the eSATA port of the ENVR8304E-8CH).
Front Panel
1
2
3
4
5
8
7
6
No. Name Description
1 Power Indicates the power is on.
2 REC Indicates the NVR is recording.
3 LAN Indicates the NVR is connected to the network.
4 Alarm Indicates an alarm input is triggered.
5
HDD1~4
Separately indicates the internal HDD 1~4 is activating.
6 eSATA Indicates the external HDD is activating.
7 IR Receiver Receiver for signals from the IR remote control.
8 USB1 / USB2
USB2.0 ports for connecting to a mouse, external storage device,
or EKB200 keyboard.