ENVR8304E-8CH 8-Channel Plug & Play NVR Quick Installation Guide Copyright © EverFocus Electronics Corp, Release Date: December, 2013 Notice: This content is subject to be changed without notice.
ENVR8304E-8CH 1. Introduction EverFocus all new NVR Solution, targeting small-scale installations such as homes and small businesses, will also be placed under the spotlight. With true plug-and-play setup and real-time local display up to Full HD resolution, the Linux-embedded solution works just like a NVR but without the need for those complicated network settings that would be otherwise required with conventional NVR systems.
ENVR8304E-8CH IP Camera Support List Camera Firmware NVR Firmware Codec EAN3300 V.1.2.2 V1.0.0 H.264 O EAN3220 V.1.2.2 V1.0.0 H.264 EAN3120 V.1.2.2 V1.0.0 EDN3340 V.1.2.2 EDN3260 Power Consumption Multi-s tream Type X O Box 5W 5.36W O X O Box 5W 5.22W H.264 O X O Box 5W 6.21W V1.0.0 H.264 O X O Indoor Dome 7.44W 8.45W V.1.2.2 V1.0.0 H.264 O X O Indoor Dome 8.7W 9.73W EDN3160 V.1.2.2 V1.0.0 H.264 O X O Indoor Dome 8.16W 9.22W EHN3340 V.1.2.
ENVR8304E-8CH 37.12W (24 VAC) 37.12W (24 VAC) EPN4222 V.1.0.9 V1.0.0 H.264 O O O Speed Dome EPN422i V.1.0.9 V1.0.0 H.264 O O O Speed Dome EPN4222p V.1.0.9 V1.0.0 H.264 O O O Speed Dome X 24W EPN4222pi V.1.0.9 V1.0.0 H.264 O O O Speed Dome X 24W EPN4220 V.1.0.9 V1.0.0 H.264 O O O Speed Dome EPN4220i V.1.0.9 V1.0.0 H.264 O O O Speed Dome EPN4122 V.1.0.9 V1.0.0 H.264 O O O Speed Dome EPN4122i V.1.0.9 V1.0.0 H.
ENVR8304E-8CH Packing List • ENVR8304E-8CH x 1 • CD x 1 (Please see Note 3.) • User Manual x 1 • Mouse x 1 • Power Cord x 1 • SATA Cable x 4 • HDD Bracket x 4 • Rack Ear x 2 • IR Remote Control x 1 • AAA Battery x 2 (Please see Note 4.) • Sliver Screw x 16, Washer Head Screw x 8, M3 (φ6.8) Screw x 4 • RJ-45 CAT5 Cable x 1 (Please see Note 5.) Note: 1. Equipment configurations and supplied accessories vary by country. Please consult your local EverFocus office or agents for more information.
ENVR8304E-8CH Optional Accessories • EKB200 (USB controller keyboard: connect to the PC or the NVR to control the PTZ cameras connected to the NVR). • EKB500 (RS-485 keyboard: connect to the RS-485 port to control the PTZ cameras connected to the NVR). • EDA450 (eSATA Storage Device: connect to the eSATA port of the ENVR8304E-8CH). Front Panel 1 2 3 4 5 6 7 8 No. 1 2 3 4 5 6 7 Name Power REC LAN Alarm HDD1~4 eSATA IR Receiver Description Indicates the power is on.
ENVR8304E-8CH Rear Panel 1 2 8 No. 1 2 3 4 Name Power eSATA Port PoE Port 1~8 Uplink Port 5 USB3 / USB4 6 Audio Input (RCA socket) 7 Audio Output (RCA socket) 8 9 Power Port RS-232 Port 10 RS-485 Port 11 HDMI Port 12 VGA Port 13 WLAN 14 15 16 LAN Alarm Input Alarm Output 3 9 10 11 12 4 13 14 5 15 6 7 16 Description Press to turn On / Off the NVR. Connects to an external eSATA storage device. (EDA450) Connects to 8 IP cameras without extra power supply.
ENVR8304E-8CH 2. Installation 2.1 Hard Disk Drive Installation 1. Make sure the NVR is power-off. 2. Unscrew the ten housing screws on the NVR, and open the housing. 3. Screw two HDD brackets on both sides of the HDDs using the Sliver Screws. Silver Screw HDD Bracket 4. Use the SATA Cable, and connect one end to the SATA port on the small PCB inside the NVR, and the other end to the SATA port on the HDD. 5. Connect the internal power cable to the HDD.
ENVR8304E-8CH Note: The internal power cable is connected to the Main board inside the NVR. The power cable features two connectors, which can be used to connect to two HDDs. 6. Screw the HDDs with the brackets inside the NVR using the Washer Head Screws. 7. Screw back the housing to the NVR. 2.2 Rack Mount To install rack ears on the NVR, use the supplied two Rack Ears and the four M3 (φ6.8) Screws for rack mount installation on both side.
ENVR8304E-8CH 3. Basic Connection The instructions below describe the basic connection for ENVR8304E-8CH Mouse & EKB200 Keyboard IP Cameras 1 ~ 8 3 6 7 Line Level Audio In 5 1 2 8 4 Network Power Cord Main Monitor Main Monitor (VGA) (HDMI) Line Level Audio Out Web Remote PowerVideo Plus (CMS) Client 1. Using the supplied Power Cord, connect one end to the 100-240 VAC~ port on the NVR and the other end to the 100-240 VAC~ power outlet. 2.
ENVR8304E-8CH 4. Accessing the NVR You can look up the IP address and access the Web interface of the NVR using the IP Utility (IPU) program, which is contained in the CD. It can also be downloaded from EverFocus’ Website: http://www.everfocus.com/tools.cfm. Please connect the NVR in the same LAN of your computer. 1. Install and then start the IPU program . The following dialog box appears. 2. IPU will automatically search the IP devices connected in the LAN.
ENVR8304E-8CH 6. When first connecting to the NVR’s IP address, the following dialog may appear. Please check the “Always trust content from this publisher” box and click the Run button to run the EverFocus Viewer application. 7. You may need to turn User Account Control off if you still can’t see the Remote Live View, please see the step below. 8.
ENVR8304E-8CH 5. Installing JAVA Runtime You need to install the latest JAVA software for stable operation. 1. When first connecting to the NVR’s IP address, the following dialog will show up if you didn’t install the JAVA software or its latest version on your computer. 2. Please click Update to go to the JAVA website http://www.java.com/en/, and download the latest version of the JAVA software. 3. Please go to the Control Panel > JAVA Control Panel to change settings. 4.
ENVR8304E-8CH 6. Scroll to “Check for certificate revocation using”, and select the Online Certificate Status Protocol (OCSP). Also, check Place JAVA icon in system tray in “Miscellaneous” option. 7. Scroll to “Default JAVA for Browser” and check Mozilla family. 8. Connect the NVR’s IP address again and the yellow bar may pop up on the top of the window. Please click it to run the JAVA application.
ENVR8304E-8CH 6. Browser Security Setting 6.1 Installing ActiveX Controls Follow the steps below to install the ActiveX Controls when you first connect to the NVR’s IP address. If you do not see the images below, your security settings may be too high. If so, go to “Section 6.2 Enabling ActiveX Controls.” 1. You may also prompt to install the MSXML file. Please right-click the yellow bar and select “Run Add-on…” 2. Install the MSXML file when prompted to do so. 3.
ENVR8304E-8CH 6.2 Enabling Active Controls Note this section is only necessary if you DO NOT see the image in step 1 of the 6.1 Installing ActiveX Controls popping up when you first connect to the NVR. 1. At the top of the Internet Explorer Window, click on Tools and then select Internet Options. 2. Click the Security tab at the top of the window and then click Custom Level….
ENVR8304E-8CH 3. In the Security Settings window, scroll to “ActiveX controls and plug-ins”.
ENVR8304E-8CH 6. Click the Refresh button to reload the page. 7. You may need to run the EverFocusViewer application when prompted to do so. 8. The login page will show up. Type in the user name and password and click Login to view the cameras. The default User Name is admin, while the password is 11111111.
EverFocus Electronics Corp. EverFocus Taiwan: 12F, No.79, Sec. 1, Shin-Tai Wu Road, Hsi-Chih, Taipei, Taiwan TEL: +886 2 2698 2334 FAX: +886 2 2698 2380 www.everfocus.com.tw marketing@everfocus.com.tw EverFocus Europe - Germany: Albert-Einstein-Strasse 1, D-46446 Emmerich, Germany TEL: +49 2822 93940 FAX: +49 2822 939495 www.everfocus.de sales@everfocus.
