Installation manual

ENR 400 Installation Manual
55 of 81 ENR400_ma_inst_en_rev01
Adjust the Scheduled Setting: You can manually change the setting at any time after you insert or load a
period of schedule.
Option 1: Move the cursor to the Time Bar and change the length or move the bar sideway to change the
start and end points.
Option 2: Click on the Configure icon or double click on schedule information on the screen (highlighted in
blue) to obtain the Encoding Option panel (next page) and change the setting as wished.
Configure: Click on the configure icon to obtain the Encoding Option panel.
Time Bar
Configure
Schedule
Information