Installation manual

ENR 400 Installation Manual
50 of 81 ENR400_ma_inst_en_rev01
5.5.2.5 Event action: Signal digital output
This event action allows to switch a contact output of an installed IP-device.
After selecting SIGNAL DIGITAL OUTPUT as event action and double click opens a window with all
available digital output contacts in the system:
Activated the checkbox at desired contact output and confirm with OK.
5.5.2.6 Event action: Send a SMS message
After selecting SEND A SMS MESSAGE as event action and double click opens a window with a list of
available contact persons (setup in > CONFIG > SETTING > ADDRESS BOOK required):
Select a contact for SMS notification and confirm with OK.