Specifications

FH7517EBL / FH7519EBL Installation / Operation 6 of 12
7 SETUP
All settings of the monitors are managed by an OSD setup menu.
Press "MENU" key to open Main Menu:
Select a Menu item with "+" or "-" and confirm with "SELECT" key.
7.1 Picture Setup
Picture Mode
Press “-” OR “+” to select the picture mode:
User, Standard, Movie, Vivid
User mode allows full manual adjustment
Brightness
This is used to set the brightness of the screen.
Press “-” OR “+” to adjust the parameter.
Contrast
This is used to adjust the image contrast.
Press “-” OR “+” to adjust the parameter.
Tint
Setup for Tint (color tone).
Press “-” OR “+” to adjust the parameter.
Saturation
Setup for color saturation.
Press “-” OR “+” to adjust the parameter.
Sharpness
Adjust the sharpness. It makes the image become soft.
Press “-” OR “+” to adjust the parameter.
Color Temp.
Press “-” OR “+” to adjust the color tones.
“ User, Cool , Warm , Normal “
USER mode allows individual setup for red, green, blue.
DNR
Press “-” OR “+” to adjust the noise reduction.
“High , Medium , Low , Off “